3 BASIC COPY MODES
60 Enlargement and Reduction Copying
Specifying both the original size and the copy paper size separately
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press [ZOOM] on the touch panel.
4
Select the desired sizes for the original and copy paper.
y If you want to select a size other than the following for the original size and copy paper size, you need to
register the size as “OTHER”. Once you register this size, it will be specified every time you press [OTHER]
on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
P.61 “Registering paper sizes to “OTHER” size”
y Paper sizes can also be registered by pressing the desired drawer button of the equipment status indication
area on the BASIC menu.
5
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
