Toshiba E-studio3555c - Equipment Component Identification; Reversing Automatic Document Feeder; Operators Manual Pocket; USB port

1 OVERVIEW
6 Scan Features
Scan Features
With the equipment, originals placed in the Reversing Automatic Document Feeder
*
or on the original glass
can easily be scanned as image data. The image data can then be stored in the e-Filing boxes and/or the
shared folder of the equipment and/or sent to e-mail addresses.
* The Reversing Automatic Document Feeder is optional for e-STUDIO4540C Series, e-STUDIO507 Series, e-STUDIO456 Series,
e-STUDIO2550C Series, e-STUDIO5055C Series, e-STUDIO307LP and e-STUDIO306LP.
 Scan functions
This equipment supports 5 scan functions; “Scan to e-Filing”, “Scan to File”, “Scan to E-mail”, “Scan to USB”
and “Web Service Scan”.
 e-STUDIO507 Series, e-STUDIO456 Series, e-STUDIO857 Series and e-STUDIO856 Series provide
the scanning function as an option. However, this optional scanning function is already installed in
some models.
 These functions below are available only when the hard disk is installed in the equipment.
- Scan to e-Filing
- Scan to File (MFP LOCAL)
- Specifying more than one network folder (REMOTE 1 / REMOTE 2)
- Saving scans as XPS files
- Previewing scans
- Scanning With Dual Functions (Dual Agents)
- Saving sent data as a file in the shared folder of the equipment by Internet fax (Internet Fax and File)