4 USING TEMPLATES
94 Using Scan Templates
7
Press [OK].
The template buttons are displayed for the selected group.
8
Select the template that you want to use.
If you select a password-free template for which the automatic start function is enabled ( is shown
on the button), the equipment automatically starts the scanning operation. (End of procedure)
If you select a password-free template for which the automatic start function is disabled, the SCAN
menu appears. In this case, proceed to step 13.
If you select a template for which a password is set, you need to enter the password. In this case,
proceed to step 9.
icon appears on a meta scan template. If you select a meta scan template, proceed to step 12.
9
Press [PASSWORD].
To Next Page
Loading...
