Toshiba e-STUDIO356 - Basic Fax Operation

Chapter 2 BASIC OPERATION
Basic Fax Operation
The basic procedures for sending a fax (the FAX Unit is optional), such as specifying fax numbers in the address book or setting
the transmission conditions, are as follows.
24
Press the [FAX] button on the control panel.
11
Sending a fax
If you make a mistake when entering a fax number,
press [BACK SPACE] on the touch panel to delete them
one by one.
Or press the [CLEAR] button on the control panel or
[CLEAR] on the touch panel to delete all the numbers
you entered.
Alternatively, you can press the [START] button on the
control panel to send a fax.
Key in the fax number of the recipient by pressing [INPUT FAX No.] on the touch panel or
the digital keys on the control panel.
33
Press [SEND] on the touch panel. The fax starts being sent.
44
Place the original(s).
& P.16 “Placing originals” in this manual
22