2 PRINTING FROM WINDOWS
84 Setting Up Print Options
5) Paper Size
Enter A (Length) and B (Width) to specify the paper size.
The selectable range of A (length) and B (width) differs depending on the model. Select values within
the range shown on the right of each.
6) Units
Select the unit for the paper size. The default unit varies depending on the regional setting in the Windows.
To register a custom paper size, either A (Length) or B (Width) should differ by more than 0.3 inches (7
mm) from the standard paper size. If not, the created custom paper size is considered as the standard
paper size.
You cannot create a custom paper size with A (Length) longer than B (Width). If you want to print such
a document, do so by selecting [landscape] for the [Orientation].
There are some precautions when you use custom size paper longer than the maximum standard size
paper. For details, see the following page:
P.131 “Printing on custom size paper longer than the standard size paper”
To Next Page
Loading...
