2.PRINTING FROM WINDOWS APPLICATIONS
Setting the Paper and Reproduction Ratio 23
PRINTING FROM WINDOWS APPLICATIONS
3
In [Tab Manufacturer], select the product name of the tab paper, or select [Others] if you are
using a product not displayed.
4
When you select [Others], enter the width of the tab extension in [Tab Extension].
5
Enter the width to shift the printed image in [Image Shift Width].
If you created a document in Step 1, enter the width of the tab extension here.
The margin between the shifted text and the right edge of the tab extension must have a space of at least 0.17
inches (4.2 mm). Enter the same value in [Tab Extension] and [Image Shift Width].
6
Click [OK].
7
Set other printing functions as needed, and then click [OK].
8
Click [Print] or [OK] to send the job.
9
Place the tab paper with the tab outside.
When loading tab paper in the bypass tray, make sure the tab is on the outside.
See the Paper Preparation Guide for details.
10
Press [JOB STATUS] on the touch panel.
11
Press the [START] button on the control panel.
To Next Page
Loading...
