2.PRINTING FROM WINDOWS APPLICATIONS
72 Saving Print Settings
Saving frequently used settings (Profile)
This allows you to save the print settings or apply the saved settings to a print job.
To print using profiles, you must first create the saved profile.
P.72 “Saving a profile”
After saving a profile, you can apply its settings to a print job.
P.73 “Loading a profile”
You can also delete unnecessary profiles.
P.73 “Deleting a profile”
There are 5 default profiles.
BW, Duplex, Staple & 2in1
Color Booklet
Duplex & Staple
Duplex, Staple & 2in1
Duplex, Staple & Punch
Saving a profile
You can register up to 20 profiles (including 5 default profiles) for each printer driver.
You can delete the default profile or overwrite it by changing its contents and saving it under the same name.
1
Configure the print options on each tab.
2
Click [Save Profile] to save the profile.
3
Enter a profile name, and then click [OK].
Enter up to 63 characters for the file name.
If you enter an existing profile name, you are prompted to confirm if you want to overwrite it. Click [OK] to
overwrite.
You cannot save more than 20 profiles. If you try to save a 21st profile, it is saved as a temporary profile. To
register this temporary profile, delete unnecessary profiles first, select [Temporary Profile], and then click
[Save Profile].
You cannot specify [None] for the profile name.
4
The profile is saved.
To Next Page
Loading...
