Toshiba e-Studio477s - How to Load the Paper; After Setting Paper Size and Type, Press [OK]; Select Other Copy Modes and Press [START]; Close the Bypass Tray

Replacing Consumables / Maintenance Units
- 67 -
2
1
3
4
5
6
7
4
Pull out the cartridge.
5
Take the empty staple case out of the staple
cartridge.
6
Install a new staple case into the staple
cartridge.
7
Press down the transparent cover and pull
out the seal.
8
Install the new cartridge.
9
Close the finisher cover.
10
Return the document holder to its original
position.
1
2
3
1
1
2