8
Lower the paper set cover.
9
Hook one tab of the paper feed roller cover
by pressing the right arm inward while
lifting up the bypass tray lightly.
Note
• If closing the bypass tray without returning the tab to
the correct position, the paper set cover may be
broken. Be sure to return the tab to its original position.
10
Also hook the other tab of the paper feed
roller cover by pressing the left arm inward
while lifting up the bypass tray lightly.
Note
• If closing the bypass tray without returning the tab to
the correct position, the paper set cover may be
broken. Be sure to return the tab to its original position.
11
Close the bypass tray.
If the bypass tray cannot be closed, return the paper set
cover to the correct position by pressing the paper
loading part on the bypass tray downward.
Clean the LED heads
Clean the LED heads if white streaks appear or fading occurs
when printing, or when characters become smudged.
1
Turn OFF power to the machine.
For a detailed explanation, see "Turning Power Off" in
the Setup Guide.
2
Hold the Document holder lever and lift the
Document holder.
To Next Page
Loading...
