When cleaning the bypass tray
1
Open the bypass tray forward by inserting
your fingers into the front recesses.
2
Release the tab of the paper feed roller
cover by pressing the right arm inward
while lifting up the bypass tray lightly.
3
Also press the left arm inward while lifting
up the bypass tray lightly to release the tab
of the paper feed roller cover.
4
Open the paper set cover until it touches
the machine.
5
Wipe the two paper feed rollers with a wet
cloth that has been wrung out well.
6
Open the separation roller cover forward
while pressing the center part of the bypass
tray. Wipe the separation roller with a wet
cloth that has been wrung out well.
7
Close the separation roller cover.
To Next Page
Loading...
