Toshiba e-Studio477s - Loading Documents; Loading the Documents; When Loading a Document in the Automatic Document Feed; When Loading a Document on the Platen (Glass Surface)

2
1
3
4
5
6
7
Moving or Transporting the Machine
- 76 -
● Moving or Transporting the Machine
Moving the Machine
1
Turn OFF power to the machine.
(1) Press the [ON/OFF] button until a "pip"
sound is heard.
(2) "Shutdown is in progress." appears for a
while, and then the power is turned OFF.
(3) Turn the power switch OFF.
2
Remove the following parts.
• Unplug the power cord and ground wire
• Remove any cables
• Remove any paper from the drawers
3
Two or more people are required to safely
move the machine.
For the equipment with additional
drawer units installed
Before moving the machine, remove the anti-tip feet and then
unlock the casters (two places).
After moving the machine, lock the casters and then return the
anti-tip feet to their original positions.
For more information, refer to the Setup Guide.