TEMPLATES
- 120 -
3
Select the public template group.
1) Press the [REGISTRATION] tab.
2) Press [PUBLIC TEMPLATE GROUP].
3) Press [OPEN].
4
Press [PASSWORD].
The on-screen keyboard appears.
5
Enter the Admin Password using the on-
screen keyboard or the digital keys. Then
press [OK].
6
Select a template.
1) Press a blank button.
2) Press [SAVE].
To switch the menu
Press or .
7
Enter the necessary information about the
template.
NAME 1 & 2: Enter the name of the template. NAME 1
appears above the template button and NAME 2
appears below. Be sure to enter at least one of them.
When you press either of them, the on-screen
keyboard appears. Enter within 11 characters.
Note
• The symbols below cannot be used.
; : / \ " = | * < > ? + [ ] , .
USER NAME: Enter the name of the template owner as
required. When you press it, the on-screen keyboard
appears. Enter within 30 characters.
PASSWORD: Key in a password here, if you want to
require a password to recall the template. When you
press it, the on-screen keyboard appears. Key in
following the procedure below.
1) Press [PASSWORD] and then enter the password
(up to 20 characters) with the buttons on the
touch panel or the digital keys on the control
panel. The characters keyed in appear as
asterisks (*).
2) Press [RETYPE PASSWORD], and then key in the
password again.