EDITING FUNCTIONS
- 13 -
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
XY Zoom
You can change the reproduction ratio in both vertical and
horizontal directions separately. This function is called “XY
zoom”.
The reproduction ratio is changeable from 25 to 400%.
However in the following cases, this range is 25 to 200%.
- When the original mode is PHOTO
- When the original is placed on the RADF
- When the A4 original is copied on an A4 sheet when
Zoom is set to 50%, the edges of the image are chipped
off.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper
size.
2
Place the original(s).
3
Press [XY ZOOM] on the EDIT menu.
4
Set the reproduction ratio in both vertical
and horizontal directions.
1) Press [X], and then press either [ 25%] or
[ 400%] for a horizontal direction.
2) Press [Y], and then press either [ 25%] or
[ 400%] for a vertical direction.
3) Press [OK].
5
Select other copy modes as required, and
then press the [START] button on the
control panel.
To Next Page
Loading...
