Toshiba e-STUDIO477SL - Setting Items (Admin); Accessing the Admin Menu

2
1
3
4
5
6
7
SETTING ITEMS (ADMIN)
- 159 -
● SETTING ITEMS (ADMIN)
Accessing the Admin Menu
Follow the steps below to display the ADMIN menu in the
USER FUNCTIONS screen.
1
Press the [USER FUNCTIONS] button on
the control panel to access the USER
FUNCTIONS menu.
2
Press the [ADMIN] tab.
• When the User Management function is disabled, you
must enter the administrator password.
Proceed to the next step.
• When the User Management function is enabled, you
must log into the MFP as a user with administrator
privileges.
When you press the [ADMIN] tab, the ADMIN menu will
be displayed.
Proceed to step 5.
Note
• If you log into the MFP as a user without administrator
privileges, the [ADMIN] tab will be unavailable.
Setting role information allows you to give privileges to
users. For details of role information, refer to the
TopAccess Guide “Chapter 7: [User Management]
Tab Page”.
3
Press [PASSWORD].
The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following
page:
 P.227 "On-screen keyboard"
4
Enter the administrator password and
press [OK].
The ADMIN menu is displayed.
Memo
• If the administrator password has not been changed
before, enter the default administrator password
“123456”.
• The input password appears as asterisks (*).
5
Proceed with the administrative operation
that you require.
Pressing on the ADMIN menu (1/2) displays ADMIN
menu (2/2).
The USER FUNCTIONS screen contains the following
buttons. For details of each button, see the corresponding
page.
ADMIN menu (1/2)
ADMIN menu (2/2)
 P.160 "GENERAL"
 P.176 "NETWORK"
 P.187 "COPY"
 P.188 "FAX"
 P.188 "FILE"