Toshiba e-STUDIO477SL - Registering Templates into a Private Group; Recalling Templates

TEMPLATES
- 122 -
2
1
3
4
5
6
7
1) Press [PASSWORD] and then enter the password
(up to 20 characters) with the buttons on the
touch panel or the digital keys on the control
panel. The characters keyed in appear as
asterisks (*).
2) Press [RETYPE PASSWORD], and then key in the
password again.
3) Press [OK].
Note
• The symbols below cannot be used.
' \ % & < > [ ]
When you have entered all the necessary items, press
[OK].
The new group is now registered and the menu moves
to the one for registering templates.
4
Press the [FUNCTION CLEAR] button on
the control panel.
The menu returns to the BASIC menu.
Registering templates into a private
group
1
Set all the required functions.
Example: Editing function – image shift, reproduction
ratio – 90%, number of copy sets – 10
Note
• The [PAPER SIZE] and [PAPER TYPE] functions for
bypass copying cannot be set in templates.
2
Press [TEMPLATE] on the touch panel.
The template menu appears.
3
Select the desired group.
1) Press the [REGISTRATION] tab.
2) Select the desired group by pressing its button or
keying in its group number (3 digits).
3) Press [OPEN].
To switch the menu
Press or .
4
Key in the password for the selected group.
(If no password is set, go to step 5.)
1) Press [PASSWORD] and then enter the password
with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
5
Register a template following steps 6 and 7
on "Registering templates into the public
template group" ( P. 11 9).
Recalling Templates
When you recall a template, the functions set in the template
will be available automatically. If the automatic start function is
enabled, this equipment will automatically start the operation of
each function when you press the button for the corresponding
template.
1
Place paper in the drawer(s).
2
Place the original(s).