Need help?Do you have a question about the Toshiba e-STUDIO5018A and is the answer not in the manual?
General| Category | Multifunction Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Paper Capacity | Standard: 1, 200 sheets (2 x 550-sheet drawers + 100-sheet bypass tray) |
| Duplex Printing | Yes |
| Hard Disk Drive | Optional |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Print Speed | 50 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Paper Size | A4, A5, B5, Letter, Legal |
| Connectivity | USB, Ethernet |
| Memory (Standard) | 4 GB |
| Control Panel | Touchscreen |
| Warm-up Time | 20 seconds |
| Dimensions (W x D x H) | 600 x 600 x 800 mm |
| Type | Laser |
| Copy Speed | Up to 50 ppm (Letter) |
Provides an overview of the IP Fax function for sending and receiving fax jobs over an IP network.
Details the configuration steps required within TopAccess to enable and use the IP Fax function.
Details various parameters for IP Fax operation, including terminal ID, resolution, and original mode.
Covers the fundamental operations for sending and receiving IP Faxes using the device's touch panel interface.
Details the basic procedures for sending and receiving IP Fax jobs via the touch panel.
Provides step-by-step instructions for initiating an IP Fax transmission from the touch panel.
Explains the various methods available for identifying and selecting IP Fax recipients.
Details how to configure and use the N/W-Fax driver for sending IP Faxes from a computer.
Provides the fundamental procedures for transmitting IP Faxes using the N/W-Fax driver software.
Explains the methods to select and add recipients for IP Fax transmissions via the driver.
Details options for specifying recipients and configuring transmission settings within the driver's Send tab.
Provides troubleshooting steps for issues encountered during IP Fax sending or receiving.
Lists specific error codes related to IP Faxing, their causes, and suggested corrective actions.
To Next Page
