1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 35
TROUBLESHOOTING FOR THE HARDWARE
7
Remove the misfed paper.
If the paper is caught by the roller in the exit section, remove it by lifting the roller up with your fingers.
8
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the finisher body and the upper receiving tray.
This could injure you.
You can close it by pressing the right side of the lever with your hand.
To Next Page
Loading...
