4.EDITING FUNCTIONS
Tab Paper 123
4 EDITING FUNCTIONS
TAB EXTENSION
Set the tab width and shift width of tab paper. These must be set before performing [COPY ON TAB], [BLANK TAB
INSERT] or [COPIED TAB INSERT].
1
Press [TAB PAPER] on the EDIT menu.
2
Press [TAB EXTENSION].
3
Adjust the tab width and shift width.
1) Press [DRAWER] for setting tab paper in the drawer or [BYPASS FEED] for setting it on the bypass tray.
2) Press [TAB EXTENSION] to adjust the tab width using or .
3) Press [SHIFT MARGIN] to adjust the shift width using or .
4) Press [OK].
Though the initial value is set to 13 mm (0.5") for both the tab width and shift width, this can be changed. For
details, refer to the MFP Management Guide.
To Next Page
Loading...
