2.RECOMMENDED INSTALLATION
Procedure for Recommended Installation 29
RECOMMENDED INSTALLATION
3. Click [OK].
* When SNMP V1, V2, and V3 are configured for your TOSHIBA MFP, perform both of the above settings.
5
A list of the discovered printers is displayed. Then select this equipment on the list and then click
[OK].
The TCP/IP port is created.
6
The installation starts.
7
When the installation is complete, click [Finish].
The main menu is displayed.
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my computer now.”
and click [Finish] to restart your computer.
8
Click [Exit].
When a message “Do you want to close TOSHIBA e-STUDIO Software Installer?” appears asking whether to finish
the installer, click [Yes].
To Next Page
Loading...
