Toshiba E-STUDIO6508A - Procedure for Installation

4.INSTALLING PRINTER DRIVERS FOR MAC OS
96 Installing the Printer on Mac OS
 Option setting list
 Model Selection
TOSHIBA e-STUDIO5005ACSeries — Select this when e-STUDIO5005AC Series is used.
TOSHIBA e-STUDIO5008ASeries — Select this when e-STUDIO5008A Series is used.
TOSHIBA e-STUDIO7506ACSeries — Select this when e-STUDIO7506AC Series is used.
TOSHIBA e-STUDIO8508ASeries — Select this when e-STUDIO8508A Series is used.
 Finisher
Not Installed — Select this if a finisher is not installed.
Saddle Stitch Finisher — Select this when the Finisher or Saddle Stitch Finisher is installed.
Saddle Stitch Finisher and Hole Punch — Select this when the Finisher or Saddle Stitch Finisher and Hole Punch
unit are installed.
Job Separator — Select this when the Job Separator is installed.
Inner Finisher (2 Trays) — Select this when the Inner Finisher (2 Trays) is installed.
 Drawers
Drawer 1 — Select this when the drawer 1 is installed.
Drawer 1 & LCF — Select this when the drawer 1 and LCF are installed.
Drawer 1 & Drawer 3 — Select this when the drawer 1 and 3 are installed.
Drawer 1 & Drawer 3, 4 — Select this when the drawer 1, 3 and 4 are installed.
Drawer 1 & Drawer 2 — Select this when the drawer 1 and 2 are installed.
Drawer 1, 2 & LCF — Select this when the drawer 1, 2 and LCF are installed.
Drawer 1, 2 & Drawer 3 — Select this when the drawer 1, 2 and 3 are installed.
Drawer 1, 2 & Drawer 3, 4 — Select this when the drawer 1, 2, 3 and 4 are installed.
 Enable Multi Station Print
Select this to enable the Multi Station Print.