Toshiba E-STUDIO6508A - Page 68

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
68 Other Installations
4
Select [The printer that I want isn’t listed].
5
Select the [Select a shared printer by name] check box, enter “http://[IP address]:631/Print” in
the edit box in [Find by printer name or TCP/IP address] screen.
 Enter the IP address of this equipment instead of [IP address].
Example: IP address = 192.168.1.2
http://192.168.1.2:631/Print
 Enter the IPv6 address in the [Printer Name or IP Address] box when the MFP is connected in an IPv6 network.
 If your network uses a DNS or WINS server, enter the printer name of this equipment provided from DNS or
WINS instead of [IP address].
Example: Print Server Name = Mfp-05212774
http://Mfp-05212774:631/Print
 When you connect from the Internet, enter the FQDN of this equipment provided from DNS instead of [IP
address].
Example: URL = mfp_05212774.toshibatec.com
http://mfp_05212774.toshibatec.com:631/Print
“P” for “Print” in the IPP URL must be capitalized. The IPP port can be created by entering “print” (non-
capitalized) in the IPP URL, but the print job cannot be sent to the equipment. In that case, delete the IPP port
and then create the IPP port correctly again.
 If the IPP Port80 Enabled option is enabled on this equipment, you can exclude the port number from the URL.
(i.e. “http://192.168.1.2/Print”)
 If the Enable SSL option for IPP Print is enabled, you must enter “https://[IP address]:[SSL port number]/Print”
in the edit box. (i.e. “https://192.168.1.2:443/Print”)