© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
FIRMWARE UPDATING
6 - 41
6
Update program
The firmware can be updated to the latest version without considering the current one by storing the
update program together with the firmware data file for updating in the USB Storage Device.
Fig. 6-37
Important:
• The "mentusb.o" file stored in the root of the USB storage device is a common file in e-
STUDIO451c Series, e-STUDIO452 Series and e-STUDIO282 Series. To save the firmware
of more than one model into one USB storage device, one "mentusb.o" file stored in the root
of USB storage device is sufficient.
• Be careful not to mix up the "mentusb.o" file because there is a file whose name is the same
in the localization tool.
Name File name Stored
Tool object for updating mentusb.o root
Update program dlFirmWare_520_850 [520_850] folder
(Model specific folder)
USB Storage Device
520_850
dlFirmWare_520_850
firmImage0.bin
1
3
:
2
firmImage1.bin
firmImage2.bin
mentusb.o
07/05
To Next Page
Loading...
