23
English
SETTING UP YOUR TV
ATV Manual Tuning
The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the feature
if the television cannot be connected to a media recorder/
decoder with a SCART lead or when you want to tune-in a
station on another System.
Use
C / c to move across the screen and select any of the
ATV Manual Tuning options. Then use
B / b to adjust the
settings.
1 Position
The number to be pressed on the remote control to
tune the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4 Skip
Set Skip to On (
8) or Off (() for the selected
channel. See page 24.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced.
See page 89.
9 Station
Station identification. Use the
Bb and Cc buttons to
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
a In the Channel Tuning menu, press b to select
ATV Manual Tuning and press OK.
b Press B / b to select the desired position. We
suggest Pos. 0 for a media recorder.
c Press OK to select. If the channel chosen for the
media recorder is set to skip, Skip should be
removed before storing.
d Press c to select System and press B / b to
change if required.
e Then press c to select Search.
f Press B / b to begin the search. The search
symbol will flash.
Tuning
I
A
1
C
2
0
C
V R
123 4 65 7 8 9
To Next Page
Loading...
