26
English
SETTING UP YOUR TV
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency: Input a specific frequency to be scanned
Modulation: Choose from one of five QAM modulation
options
Symbol Rate: Input a specific baud rate (KS/s) to be used
for the manual scan
Highlight Start Scan and press OK.
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Press
B / b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search
Option) and press
C / c to select the required option.
Highlight Start Scan and press OK.
DTV Settings
The channel order may be changed to suit your personal
preference.
a Select DTV Settings from the Installation menu
and press OK.
b Press b to select Channels and press OK.
c For your convenience, you can jump to specific
places in the list by one of two methods.
Line Number Jump —Use the number
buttons (0-9) to input the line number you want to
select and press OK.
It is also possible to change the Position number of
a particular channel.
Renumber — Press the RED button to
renumber the highlighted channel. Edit the
channel number using the number buttons and
press OK. If the position number you input already
exists, a confirmation window will appear.
Manual Tuning for DVB-C
Manual Tuning for DVB-S
To Next Page
Loading...
