25
English
SETTING UP YOUR TV
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the Channel
Tuning menu.
b With the list of channels showing, press B / b to
highlight the position to be moved and press
c.
c Press B / b to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
d Press C to save your move.
Repeat as necessary and press EXIT.
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable/
Satellite setting.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel is
known.
a Select DTV Manual Tuning from the Channel
Tuning menu and press OK.
b Enter the multiplex number using the number
buttons or use
C / c to adjust the number up or
down.
c Highlight Start Scan and press OK. The television
will automatically search for that multiplex.
When the multiplex is found, any channels that are
not currently in the channel list will be added and
the channel information at the top of the screen will
be updated.
d Repeat as necessary. Press EXIT to finish.
Sorting positions
To Next Page
Loading...
