EasyManua.ls Logo

Toshiba MCY-MAP0601TP Series User Manual

Toshiba MCY-MAP0601TP Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Manual 1
English
AIR CONDITIONER (MULTI TYPE)
Installation Manual
For commercial use
Outdoor Unit
Model name:
MCY-MAP0401TP Series
MCY-MAP0501TP Series
MCY-MAP0601TP Series
2FAN_IM_DB04905901-00.book Page 1 Friday, October 24, 2014 3:19 PM
1121701001
Question and Answer IconNeed help?

Do you have a question about the Toshiba MCY-MAP0601TP Series and is the answer not in the manual?

Toshiba MCY-MAP0601TP Series Specifications

General IconGeneral
BrandToshiba
ModelMCY-MAP0601TP Series
CategoryAir Conditioner
LanguageEnglish

Summary

Precautions for Safety

General Safety Warnings and Cautions

General warnings and cautions to be observed during installation.

Installation Location Safety Considerations

Safety considerations for selecting the outdoor unit installation location.

Installation Procedures and Guidelines

New Refrigerant System Precautions

Handle R410A refrigerant and associated oil with care.

Installation Conditions and Location Selection

Outdoor Unit Installation Location Criteria

Select a durable, well-ventilated location away from hazards and noise.

Refrigerant Piping Installation

Refrigerant Piping Connection

Key Piping Work Cautions

Key points for piping work: keep clean, connect tightly, evacuate air, check leaks.

Installation Cautions and Airtight Testing

Airtight Test Procedure and Leak Detection

Steps for conducting airtight tests and detecting leaks using pressure.

Air Purge and Refrigerant Addition

Additional Refrigerant Calculation Method

Calculating and adding refrigerant based on pipe length and unit type.

Electric Wiring and Communication Specifications

Address Setting Procedures

Automatic Address Setting Steps

Procedure for automatic address setting of indoor and outdoor units.

Manual Address Setting with Remote Controller

Confirming Indoor Unit Addresses and Positions

Indoor Unit Address Confirmation via Remote

How to view indoor unit addresses and positions using the remote controller.

Changing Indoor Unit Addresses

Changing Addresses Using Wired Remote Controller

Methods to change indoor unit addresses using a wired remote controller.

Test Run Procedures and Preparations

Pre-Test Run Checks and Cautions

Confirming outdoor unit valve status and earth resistance before test run.

Test Run Using Remote Controller

Operating the unit normally via remote controller to check running condition.

Forcible Test Run Caution

Caution against using forcible running except for testing.

Test Run Operations via Outdoor Unit Interface Board

Individual Indoor Unit Test Run Procedure

Procedure for performing an individual test run on a specific indoor unit.

Collective Test Run and Operation Finishing

Collective Test Run Start Operation

Procedure to start a collective test run for all connected units.

Troubleshooting Guide and Check Codes

7-Segment Display and Check Code Interpretation

Diagnosing outdoor unit failures using 7-segment display and check codes.

Outdoor Unit Check Code List

List of check codes and their corresponding error names for outdoor units.

Refrigerant Leakage Warnings and Safety Limits

Concentration Limit Check for Safety

Ensuring refrigerant concentration stays within safe limits to prevent suffocation.

Related product manuals