To Next PageTo Next PageWhat should I do if my Toshiba Air Conditioner displays other lines connected during automatic addressing?
If your Toshiba Air Conditioner displays other lines connected during automatic addressing, disconnect other lines to enable proper addressing. The error may be caused by other line outdoor or indoor connections.
What to do if my Toshiba MCY-MAP0604HT8 displays a gas leak detection error?
If your Toshiba Air Conditioner is showing a gas leak detection error, initiate gas leak testing procedures. The error might be related to TS or TD conditions.
What to do if my Toshiba MCY-MAP0604HT8 is showing duplicated indoor addresses?
If your Toshiba Air Conditioner is showing duplicated indoor addresses, check and correct indoor addresses to ensure they are unique. This duplication is the cause of the error.
How to troubleshoot a Toshiba Air Conditioner with a compressor error (Locked)?
To troubleshoot a Toshiba Air Conditioner displaying a compressor error (Locked), check the compressor lock condition.
What should I do if my Toshiba MCY-MAP0604HT8 displays a low pressure protective operation error?
If your Toshiba Air Conditioner displays a low pressure protective operation error, check the system pressure levels.
What to do if my Toshiba Air Conditioner displays a Pd sensor error?
If your Toshiba Air Conditioner displays a Pd sensor error, inspect Pd sensor.
What should I do if my Toshiba Air Conditioner displays an outdoor pressure sensor miswiring (Pd, Ps) error?
If your Toshiba Air Conditioner displays an outdoor pressure sensor miswiring (Pd, Ps) error, check wiring for outdoor pressure sensors.
What to do if my Toshiba MCY-MAP0604HT8 Air Conditioner displays a Ps sensor error?
If your Toshiba Air Conditioner displays a Ps sensor error, inspect Ps sensor.
What to do if my Toshiba MCY-MAP0604HT8 displays a TE sensor error?
If your Toshiba Air Conditioner displays a TE sensor error, check TE sensor wiring.
What to do if my Toshiba MCY-MAP0604HT8 displays an inverter DC voltage error (on compressor)?
If your Toshiba Air Conditioner displays an inverter DC voltage error (on compressor), check the inverter DC voltage supply.
General| Brand | Toshiba |
|---|---|
| Model | MCY-MAP0604HT8 |
| Category | Air Conditioner |
| Language | English |
General safety guidelines for installation.
Guidelines for choosing a safe and suitable installation location.
Safety precautions during the installation process.
Lists necessary tools and handling precautions for R410A refrigerant.
Preparations and checks required before starting installation.
Criteria for selecting the installation site for the outdoor unit.
Procedure for removing pipe covers and creating openings for pipes.
Details on selecting appropriate power supply and wiring specifications.
Guidelines for communication wiring design and summary.
Procedure for automatic setting of indoor unit addresses.
How to set indoor unit addresses manually using a remote controller.
Pre-test checks before powering on the unit.
Procedures for performing test runs using remote controller or P.C. board.
Guide to interpreting error codes displayed on the outdoor unit.
Table of check codes and their meanings.
Information on refrigerant concentration limits and safety measures.
