D
David PowellSep 13, 2025
What does error F07 mean for a Toshiba Air Conditioner?
- JJonathan FloresSep 13, 2025
If your Toshiba Air Conditioner displays error code F07, it indicates a TL sensor error.
To Next PageTo Next PageWhat does error F07 mean for a Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays error code F07, it indicates a TL sensor error.
Why does my Toshiba MCY-MHP0506HT-E display a check code related to address setup?
If a check code is displayed on the Toshiba Air Conditioner remote controller, and it's related to address setup, you may need to set up the address again. This is especially important if only line addresses of the connected indoor units are undefined, the outdoor line address and the line addresses of all the indoor units do not match, or the indoor addresses are duplicated.
What to do if a check code is displayed on the Toshiba Air Conditioner due to Indoor / Outdoor communication circuit trouble?
If a check code appears on your Toshiba Air Conditioner's remote controller and you suspect indoor/outdoor communication circuit trouble, check SW30 bit 2 of the outdoor unit. If there is no connection between multiple refrigerant lines, SW30 bit 2 should be on. Also, inspect the communication connector between the indoor and outdoor unit.
What to do if a check code is displayed on the Toshiba MCY-MHP0506HT-E due to transmission circuit trouble?
If a check code is displayed on the Toshiba Air Conditioner remote controller, and it's related to a transmission circuit trouble at the interface side, replace the interface P.C. board.
What does error F08 mean on a Toshiba MCY-MHP0506HT-E Air Conditioner?
If your Toshiba Air Conditioner displays error code F08, it indicates a TO sensor error.
What does E15 error mean on a Toshiba MCY-MHP0506HT-E Air Conditioner?
The E15 error on your Toshiba Air Conditioner indicates that there is no indoor unit during automatic addressing.
What does E08 error mean on Toshiba MCY-MHP0506HT-E Air Conditioner?
The E08 error on your Toshiba Air Conditioner indicates duplicated indoor addresses.
What does L04 error mean on Toshiba Air Conditioner?
If your Toshiba Air Conditioner is showing error code L04, it means there is an outdoor system address duplicated.
What does E07 mean on a Toshiba Air Conditioner?
The E07 error on your Toshiba Air Conditioner indicates an Indoor / Outdoor communication circuit error.
What to do if Toshiba MCY-MHP0506HT-E displays a check code due to undefined indoor addresses?
If a check code appears on the remote controller of your Toshiba Air Conditioner and it's due to address setup errors with undefined indoor addresses, set up the addresses again and modify the setup.
General| Brand | Toshiba |
|---|---|
| Model | MCY-MHP0506HT-E |
| Category | Air Conditioner |
| Language | English |
Lists and explains various control functions applied to the outdoor unit.
Procedure for setting up unit addresses for system operation.
Guidance for resolving issues encountered during test operations.
Outlines systematic methods for troubleshooting based on check codes.
Diagnosing problems using information shown on the remote controller display.
Mapping check codes to specific issues and locations for inspection.
Flowcharts for diagnosing specific check codes.
Instructions for replacing the interface P.C. board.
