reo Program
and Second Audio (SAP)
The unit is equipped with a feature known as multi-channel TV sound or MTS.
MTS broadcasts greatly enhance TV viewing by bringing you programs with
high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or
SAP which broadcasters can use to transmit a second language for bilingual
transmission or for other purposes.
®
Press MENU in the analog mode, then press -qor _ to select _ option.
When theTV is turned on or a channel selection
is made, "SAP" will appear on the screen.
This means that the Second Audio Program
broadcasting is available.
Press A or v to select "SAP", then press ,_ or
to select ON or OFF.
Press MENU repeatedly until the menu screen
is cleared.
MENU
O
Listeninc to stereo sound
When the TV is turned on or a channel selection
is made, the "STEREO" will appear on the screen.
This means that Stereo broadcasting is available.
You can enjoy stereo sound from the left and right
speakers.
, When mono broadcasting is received, no indication
is displayed.
, If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT
to change to mono sound.The noise should be
eliminated. Press it again to return to the stereo
sound.
desired sound
¢
Press AUDIO SELECT to select the desired sound.
i!!!;;;i i!ii
...........o
Broadcast
MONO
STEREO
MONO+SAP
STEREO+SAP
SAP setting
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Audio display
MONO
MONO
STEREO_MONO
STEREO_MONO
MONO
SAP
STEREO_MONO
SAP
®
I
32
5YS0|01A indb 32 ÷
12'152006 12:21:27 PM
To Next Page
Loading...
