Toshiba MD20F11 User Manual

DISASSEMBLY INSTRUCTIONS
B2-4
Fold
Fold it by 90
˚
43 ± 1mm
54
± 1mm
Printing
Surface
Traverse Ass'y (Bottom Side)
Check Hook
Check Hook
Fig. 2-7-E
Check Hook
Check Hook
• Loosen the wire in the direction of the arrow.
Printing Surface
55 ± 1mm
Fold
Printing Surface
10 ± 1mm
(1)
(2)
(3)
10 ± 1mm
60 ± 1mm
(4)
Reinforcement Plate
Printing Surface
Fold
Printing Surface
Printing Surface
Fold
Fold
Reinforcement Plate
Reinforcement Plate
• Proceed the steps (1) through (4).
[ 24 pin FFC ]
[ 5 pin FFC ]
When installing the FFC, fold it correctly and install it as
shown from Fig. 2-8-A to Fig. 2-8-C.
2-8: FFC WIRE HANDLING
1.
Do not make the folding lines except the specified
positions for the FFC.
1.
NOTE
Fig. 2-8-A
Fig. 2-8-B
~ FEED MOTOR ~
BLUE (4)
ORANGE (3)
~ SPINDLE MOTOR ~
BLACK (2)
RED (1)
Fig. 2-7-D
Switch PCB Ass'y
• Install wire from (1) to (4) in order.
Printing Surface
10 ± 1mm
(2)
Printing Surface
Fold
Printing Surface
59 ± 1mm
Fold
(1)
Reinforcement Plate
Printing Surface
44 ± 1mm
(4)
Fold
(3)
10 ± 1mm
Printing Surface
Fold
Reinforcement Plate
[ 6 pin FFC ]
Fig. 2-8-C
• Proceed the steps (1) through (4).

Toshiba MD20F11 Specifications

General

Brand	Toshiba
Model	MD20F11
Category	TV DVD Combo
Language	English