To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMU-AP0361H and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMU-AP0361H |
| Category | Air Conditioner |
| Language | English |
Covers warnings on installation, use, moving, repair, and general cautions.
Details specific cautions related to installation practices and environmental factors.
Identifies parts for various indoor unit types like cassette, duct, wall, and floor standing.
Identifies components of the outdoor unit.
Explains the indicators and display elements of the remote controller.
Details the function of each button in the remote controller's operation section.
Describes the procedure for first-time use and essential requirements.
Details air direction adjustment for 4-way, 2-way, and 1-way cassette types.
Covers air direction adjustment for Under Ceiling, High Wall, and Floor Standing types.
Explains how to set, cancel, and manage timer operations.
Provides guidelines and warnings for selecting an installation location.
Details safety precautions and requirements for electrical wiring.
Instructions for cleaning the air filter and resetting the indicator.
Procedures for cleaning the air inlet grille and the main unit/remote controller.
Covers pre-operation checks and operating conditions.
Explains system protection features and operational characteristics.
Details dangers and guidelines for moving or re-installing the air conditioner.
Lists common symptoms that are not failures and their causes.
Provides checks for common operational issues like lack of cooling/heating.
Details accessory parts and parts to be procured locally for installation.
Provides essential safety information for installation and handling.
Lists necessary tools and cautions for installing R410A refrigerant systems.
Specifies conditions, requirements, and places to avoid for installation.
Covers installation warnings, drain water, and snowfall protection measures.
Details on connecting refrigerant pipes, including methods and dimensions.
Guidance on selecting appropriate pipe materials and sizes.
Instructions for performing airtight tests and air purging procedures.
Covers refrigerant charging calculation and heat insulation process.
Details power supply requirements for outdoor and indoor units.
Explains control wiring, group control, and address setup.
Provides system and unit-specific wiring diagrams.
Describes automatic and manual methods for setting indoor unit addresses.
Covers confirming and changing indoor unit addresses.
Procedure for clearing indoor addresses to return to factory settings.
Guidelines and incorrect examples for connecting multiple units to an FS unit.
Instructions on how to set the item code for connected indoor units.
Procedure to set a specific indoor unit to cooling-only operation.
Step-by-step guide for performing a test operation via remote controller.
Details test operations using the outdoor unit's interface P.C. board.
Explains segment display and check codes for diagnosing issues.
Lists check codes specific to the outdoor unit and their meanings.
Shows external views and details for mounting the unit.
Step-by-step instructions for installing hanging bolts and the unit.
Guidance on connecting wires and safety precautions.
Includes system and unit-specific wiring diagrams.
Procedure to set a specific indoor unit to cooling-only operation.
Checks to perform before starting the test operation.
Steps for conducting a test operation using the remote controller.
Details test operations using the outdoor unit's interface P.C. board.
Guidelines for checking refrigerant concentration limits in installation rooms.
