Toshiba MMY-MAP0806HT8P-E - Concealed Duct and Floor Standing Unit Parts

◆ Concealed Duct Standard Type
MMD-AP✽✽✽H✽
◆ Slim Duct Type
◆ Ceiling Type
◆ Floor Standing Cabinet Type
◆ Concealed Duct High Static Pressure Type
MMD-AP018✽H✽ to AP048✽H✽
MMD-AP072✽H✽ to AP096✽H✽
Air discharge
Connect a discharge duct.
Air discharge
Connect a discharge duct.
Air discharge
Connect a discharge duct.
Air intake
Connect a suction duct.
Electrical control box
The earth screw is provided in the
electrical control box.
Earth screw
Equipped on the electrical control
box.
Horizontal louver / Vertical grille / Air
discharge
The air discharge direction can be
changed.
Air intake grille
Air is taken in through here.
Earth screw
Inside the electrical box.
Air fi lter
Filters out dust.
(Behind the air intake grille)
Discharge louver
Controls discharge air directions.
Earth screw
Return air grille
Air in the room is taken in through
here.
Return air grille
The return air duct is connected.
Air fi lter
Filters out dust.
(Inside the return air grille)
Air fi lter
Filters out dust.
(Inside the return air grille)
Air discharge
The air discharge duct is
connected.
Electrical control box
The earth screw is provided in the
electrical control box.
Electrical control box
The earth screw is provided in the
electrical control box.
Air intake
Air fi lter
Air intake
Air fi lter
Drain pan
Drain pan
Drain pan
– 8 –
15-EN 16-EN