To Next PageTo Next Page
Need help?Do you have a question about the Toshiba MMY-MAP0804HT8-E and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | MMY-MAP0804HT8-E |
| Category | Air Conditioner |
| Language | English |
Covers general safety rules, warnings, and precautions for installation and operation.
Defines the necessary qualifications and knowledge for installers and service personnel.
Details the essential protective gear for handling the air conditioner unit.
Explains various warning symbols and their meanings on the air conditioner unit.
Covers new refrigerant characteristics and procedures for disconnecting main power supply.
Lists necessary tools and provides cautions for handling new refrigerant systems.
Specifies the required clearances and conditions for installing the outdoor unit.
Provides information on the weight distribution and center of gravity of the outdoor unit.
Offers guidance for installing the unit in areas prone to snowfall.
Details specific requirements for liquid and gas piping during outdoor unit installation.
Explains the process and points for connecting refrigerant pipes to the outdoor unit.
Covers essential requirements for piping work and proper valve operation.
Details specifications for brazed pipe coupling sizes and general pipe selection.
Explains how capacity codes relate indoor and outdoor units for system configuration.
Outlines power supply requirements and specifications for wiring.
Details the selection process for power wiring based on unit models.
Illustrates the design and layout for communication wiring between units.
Describes the automatic method for setting system and unit addresses.
Details how to set addresses manually using a wired remote controller.
Explains the procedure for resetting unit addresses to factory defaults.
Guides on performing a test run using the unit's remote controller.
Details how to conduct a test run using switches on the outdoor unit's interface board.
Explains the corrective trial operation mode for testing specific unit functions.
Guides on diagnosing issues using the 7-segment display and associated check codes.
Instructions for filling out and using the machine card after installation.
Guidelines for updating the logbook with maintenance and repair details.
