EasyManua.ls Logo

Toshiba MV13N2/W - User Manual

Toshiba MV13N2/W
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TELEVISION/VCR COMBINATION
Before operating the unit, please read this manual thoroughly.
MV13N2/W
MV19N2/W
OWNER’S MANUAL
ATTENTION
If you purchase a universal remote control from your local retailer, please
contact the remote manufacturer for the required programming code.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the “CATV”
(Cable Television) mode.
If not using CATV, set this menu option to the “TV” position.
5E20101B COV-IN 14/08/2003, 15:491

Questions and Answers

  • W
    wandaroachAug 18, 2025
    What to do if my Toshiba MV13N2/W TV VCR Combo remote control does not operate?
    • D
      David AguilarAug 18, 2025
      If the remote control for your Toshiba TV VCR Combo isn't working, try the following: * Aim the remote control directly at the remote sensor. * Ensure you are within 15 feet of the unit and reduce the amount of light in the room. * Clear any obstacles blocking the path of the beam. * Replace the batteries. * Make sure the batteries are inserted correctly.
  • V
    veronica61Aug 20, 2025
    How to fix poor picture on Toshiba TV VCR Combo?
    • R
      reynoldsmckenzieAug 20, 2025
      If you're experiencing a poor picture quality on your Toshiba TV VCR Combo, here are a few things to check: * Try tuning to another channel in case the TV station is experiencing problems. * Check your picture control adjustments. * Look for any sources of local interference. * Verify the CATV connection or VHF/UHF antenna connection, and try repositioning or rotating the antenna.
  • P
    Patricia FlowersAug 23, 2025
    How to fix poor sound on Toshiba MV13N2/W TV VCR Combo?
    • K
      Kathleen DeanAug 23, 2025
      If you're experiencing poor sound quality on your Toshiba TV VCR Combo, here are a few things to check: * Try tuning to another channel in case the TV station is experiencing problems. * Check the CATV connection or VHF/UHF antenna, and try repositioning or rotating the antenna. * Look for any sources of local interference. * Ensure the MUTE button has not been pressed.
  • L
    lopezdebbieAug 26, 2025
    What to do if my Toshiba TV VCR Combo TV shuts off?
    • A
      Anna EvansAug 26, 2025
      If your Toshiba TV VCR Combo keeps shutting off, it might be due to one of these reasons: * The TV station might have stopped broadcasting, so try tuning to a new channel. * The sleep timer might be set, so set the Sleep Timer to “0”. * The OFF timer might be set, so set the OFF TIMER to “CANCEL”.
  • A
    Antonio DuncanAug 28, 2025
    How to get CATV reception on Toshiba MV13N2/W TV VCR Combo?
    • S
      Samuel AndersonAug 28, 2025
      If you're not getting CATV reception on your Toshiba TV VCR Combo, consider the following: * Check all CATV connections to ensure they are secure. * Make sure the TV/CATV Mode menu option is set to the CATV mode. * If the issue persists, the cable TV service may be interrupted, so contact your Cable TV company.
  • L
    Lisa OlsonAug 30, 2025
    How to fix noise bars on Toshiba MV13N2/W TV VCR Combo screen?
    • R
      Rebecca HallAug 30, 2025
      If noise bars appear on your Toshiba TV VCR Combo screen, it could be due to a few reasons: * The tape might be old or worn, so try replacing it. * The tracking adjustment might be beyond the range of the automatic tracking circuit, so adjust tracking manually using the SET/TR +/– buttons on the remote control. * The video heads might be dirty, so clean the video heads.
  • C
    Carolyn ColemanSep 2, 2025
    Why is my Toshiba MV13N2/W TV VCR Combo not recording?
    • M
      Melissa CooperSep 2, 2025
      If your Toshiba TV VCR Combo is not recording, it might be because the video cassette's erase prevention tab is broken off. Place a piece of vinyl tape over the hole to resolve this.
  • A
    Adrian SchwartzSep 5, 2025
    Why is there no color on my Toshiba TV VCR Combo?
    • R
      Rachael BartonSep 5, 2025
      If you're experiencing a lack of color on your Toshiba TV VCR Combo, here are a few things to check: * Try tuning to another channel in case the TV station is experiencing problems. * Check your picture control adjustments. * Look for any sources of local interference. * Verify the CATV connection or VHF/UHF antenna connection, and try repositioning or rotating the antenna.
  • M
    Michael LawrenceSep 7, 2025
    Why does the picture wobble on my Toshiba TV VCR Combo?
    • C
      Crystal WellsSep 7, 2025
      If the picture on your Toshiba TV VCR Combo wobbles or drifts, it could be due to: * TV station experiencing problems, so try another channel. * Antenna (CATV) connector is not connected or possible local interference, so check CATV connection or VHF/ UHF antenna, reposition or rotate antenna. * Cable TV channel is scrambled, so try another channel.
  • J
    jessicahebertSep 9, 2025
    Why is my Toshiba TV VCR Combo not receiving channels above 13?
    • J
      Julie CookSep 9, 2025
      If your Toshiba TV VCR Combo is not receiving channels above 13, ensure that the TV/CATV Mode menu option is in the appropriate mode and check the UHF antenna connection.

Summary

Important Safeguards

Power Source

Details on connecting and using the unit's power supply.

Grounding or Polarization

Explains the importance and function of grounding and polarized plugs.

Features

Safety Precautions

Moisture Condensation

Instructions on handling the unit in conditions prone to condensation.

Remote Control

Connections

TV Operation

VCR Operation

Recording a TV Program

Guide on how to record a television program.

Troubleshooting

Problem and Troubleshooting Guide

A comprehensive guide to diagnosing and resolving common issues.

Toshiba MV13N2/W Specifications

General IconGeneral
BrandToshiba
ModelMV13N2/W
TypeTV VCR Combo
Screen Size13 inches
Screen TypeCRT
TunerNTSC
Remote ControlYes
InputsRF, Composite
OutputsRF, Composite

Related product manuals