21
Basic setup
MENU
Manual clock setting
ENTER
You must set the date and time manually for timer recordings,
ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
Notes:
•
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes step
by holding down or .
Press MENU, then press
or to select
option.
EXAMPLE: Setting the clock to “8:30 AM”, 27th. (SAT)
March, 2004.
1
After setting the clock, date and time starts
functioning automatically.
5
Press or to select “CLOCK SET”, then
press
.
2
Press or to set the month, then press .
3
Set the day, year and time as in step 4, then
press ENTER.
4
ENTER
SETUP
MENU
ENTER
ENTER
ENTER
/ / /
MENU
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
ON
CLOCK SET
MONTH
DAY
YEAR
TIME
ENTER/MENU
3
1(MON)
2004
12:00AM
/ / / /
ENTER/MENU
/ / / /
CLOCK SET
MONTH
DAY
YEAR
TIME
3
27(SAT)
2004
8:30AM
8:30 AM SAT
To make corrections any time during the process
Press or repeatedly until the item you want to
change blinks, then set the item again.
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
/ / / /
MENU
ON
5L00201C [E]p18-21 20/4/04, 16:0521
To Next Page
Loading...
