nneetmg to optional equipment
Before connecting the unit to other equipment, be sure to turn off the power and
unptug att of the equipment from the watt outlet before making any connections.
You can enjoy the TV game, camcorder or high quality dynamic sounds of DVD
video discs or audio CDs by connecting the unit to optional audio equipment.
INPUT SELECT
Using the audio/video inPuts .........................................................................................................................
Press INPUT SELECT repeatedly to select the desired mode.
"LINE1", "LINE2" or TV channel will display on the screen for 4 seconds.
tB_ek_ (_ront)
Note: In the DVD mode this key wilt not operate.
Connecting a camcorder or a TV game
To playback from the camcorder or playing a TV Game, connect the camcorder to the unit as shown.
_ Signal flow
Illustration of MW20FP1
O
o
1#
&
o
¢#
÷
Camoorder
To AUDIO (L/R)/VtDEO OUT
Audio/Video cable (not supplied)
t t t (y_low)
(yellow)
(_vhite),_ ToAUDtO (L/R)/VtDEO IN TV GAME
(red) (LINE IN 2)
Note: Model MW27FP1 has a door on the front panel Please open it to access the AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks
Connecting to an audio system
Connect the unit to your audio system.
÷
To audio inputs of the amplifier
16
5L00201C [E]p13-17 15 _ 20/4/04, 16:04
To Next Page
Loading...
