EasyManua.ls Logo

Toshiba MW24FP1 - Connecting to Dolby Digital Amplifier; Connecting to Dolby Surround Pro Logic Amplifier; Connecting to DTS Decoder Amplifier

Toshiba MW24FP1
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
to op#onal equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the This section uses the following reference mark.
unit to optional audio equipment. [] : Front speaker I_ : Center speaker '
[] : Rear speaker _ : Signal flow
IF] : Sub woofer
Dolby Dig(ta_
Dolby Digital is the surround sound technology used in theaters showing the latest mov(es, and is now avaiiab)e to repro-
duce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the unit to a 6 channel amptifier equipped with a Dolby Digital decoder or Dolby Digital
processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the fult benefit of Pro Logic from the same DVD
movies that provide full 5.1-channel Dolby Digital soundtracks, as wett as from titles with the Dotby Surround mark.
Amplifier equipped with a_
Dolby Digital decoder |
To COAXIAL
type digital V To COAXIAL DIGITAL _1
audio input | AUDIO OUT
/
75 _;_coaxial cable (not supplied)
"Manufactured under license /
from Dolby Laboratories.|
"Doiby", "Pro Logic", and the /
doub)e-D symbol are trade-|
marks of Do)by Laboratories.J
÷
Do(by Surround Pro Logic
You can enjoy the dynamic realistic sound of Doiby Surround Pro Logic by connecting an amplifier and speaker system (right
and left front speakers, a center speaker, and one or two rear speakers).
i With an amplifier equipped with Dotby Digital
Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder."
Refer to that amplifieCs owner% manual and set the amplifier so you can enjoy Doiby Surround Pro Logic sound.
m With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
This connection is only suitable for Video CDs and Audio CDs.
Amplifier equipped with TM]
Dolby Surround Pro Logic I
input
To AUDIO (L/R) OUT I_ *Connect one or two rear speak-
V
ers. The output sound from the
Audio cable (not supplied) rear speakers will be monaural
,_:_7;: even if you connect two rear
speakers.
÷
Digita_ Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifier equipped with"]
a DTS decoder I
To COAXIAL I l
type digital To COAXIAL DIGITAL
audio input AUDIO OUT
75 £;_coaxial cable (not supplied)
:7
÷
20/4/04.16:04
"DTS" and "DTS Digital Ouf']
are trademarks of Digital /
Theater Systems, inc. J

Other manuals for Toshiba MW24FP1

Related product manuals