Toshiba MW24FP1 - Basic Setup; Starting Setup

rung setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
POWER
ENTER
÷
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press _ or _ to select your desired language,
then press ENTER.
POWER
i!_¸'i!_'
!!Jill;;i;iiii!iiiiiiiiilc_)ii!liiii!iiiii¸¸El !ili:i
ii !J
FRANCAIS
<,A.i'_/ENTEF_:>
Press _ or _, to select "TV" or "CABLE", then
press ENTER.
i;,;C_!i!!_!5_i_i_i;iiiiii!!!!_!ii_ii_ii_i!i_ii_iiiiiiiii!!!Ci_i!i!iii
TV
; i _ i
<,&/Y/ENTER>
Press _ or _ to select "START", then pressENTER.
if you select "CANCEL" and press ENTER, the
STARTING SETUP steps and changes to the TV
screen.
Now the "AUTO CH MEMORY" and "AUTO
CLOCK"starts.
After the starting setup is completed, the TV
channel appears on the screen.
i i i i_
AUTO CLOCK
Notes:
• The starting setup function will work only when you press the
POWER button for the first time.
• In 'AUTO CLOCK" setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only "Time
of day" or 'Local time zone".
÷
18 _ 20/4/04.16:05