setting
The auto clock function wilt automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
........................... TV/VCR
_ POWER
DISPLAY
÷
Preparation:
• Connect the antenna or cable system.
. If you use a cable box, turn it on.
. Rug the AC power cord to the AC outlet.
t Make sure the unit is turned off.
• If you press POWER, theAuto Clock
set is not effective•
Wait at least three minutes and press POWER.
Then press TVNCR to select TV/VCR mode.
The POWER indicator will light.
POWER _°_7
0
TV/VOR
0
Press DISPLAY to check the clock on the
8 r 47AM MON OH 125
STEREO SAP
i
.0,SPLAY
C)
If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.
_The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
. If you use a cable box and you want Auto Clock adjust
merit to be performed, the cable box must be left on.
. The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time•
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want auto clock set (Adjustment):
Press MENU, then press _ or"*> to select []
option.
MENU
CD
SETUP
i!!5111117111_i
iii:;;;;S!;_;_;_ii_ii_i6)!!
!i, iiiiiiiiT !7!7'i'i ii !i!iiiii!ir_- ili
Press t or ! to select "AUTO CLOCK",
STAf4[-}ARB TIBE
rJ_L G_T
Press _ or'_ to select "OFF".
i!!¸¸¸¸¸¸¸i¸7¸¸7i
Press MENU repeatedly until the menuscreen is cleared.
• When the AUTO CLOCK is set to
MENU <'OFF", the Auto Clock adjustment
does not function•
SETUP " Set the clock manually [_.
Notes:
. If the unit does not operate properly, or No key operation
(by the unit andlor the remote control): Static electricity,
etc., may affect the player's operation• Disconnect the AC power
cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu [_.
• If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically
19
6#
÷
5L00201C rE]p18-21 19 _ 20/4/04, 16:05
To Next Page
Loading...
