÷
ssette ropeplayback
To play a prerecorded tape.
€ TV/VCR
iil
ii
iil
REV
_....................PLAY
{_ FWD
STOP
ii
i
t Load a prerecorded tape:
(When loading a cassette tape without the erase
prevention tab, ptayback will start automatically).
Rewind or forward the tape
To start pmayback:
Press PLAY on the front panel or on
the remote.
Playback wilt start. " • _' will appear
on the screen for about 4 seconds.
Press STOPIEJECT once on the front
panel or press STOP on the remote.
The tape will stop but remain fully
loaded and ready to play.
" [] " will appear on the screen for
about 4 seconds.
STOP/EJECT
M_
Stop the playback or recording with STOP.
REW
To rewind the tape:
Press REW on the front panel or press
REV on the remote.
To forward the tape:
FF
Press FF on the front panel or press
FWD on the remote.
I il
To stop the tape-winding, press STOP. To switch to play-
back directly (without STOP), press PLAY.
[] Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FWD again and hold it down. The unit will resume the
tape winding as soon as the button is released.
Notes:
• If you play a prerecorded tape after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
• This unit selects the playback tape speed SP or SLP auto-
maticatty.
, When you select the TV/VCR mode during DVD playback, DVD
playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.
÷
34
5L 0201C [E]p33-37
34 . 20/4/04.16:06
To Next Page
Loading...
