Toshiba MW24FP1 - Playback (VCR); Loading and Unloading Cassette Tape

ading and unloading a eassdte tape
Use oniy video cassette tapes marked [_].
÷
Push the center of the tape until it is automatica{Iy
inserted.
insert the cassette tape with its {abe[ed side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab / \
Automatic power ON
When you insert a cassette tape the unit power wi{t turn ON automatically.
Automatic p{ayback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
1
STOP/EJECT
W_
D
Automatic tape eject
Press STOP/EJECT on the front panel.
2
Remove the cassette tape.
This unit wi[I automaticaI{y rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape w[{I be ejected automatically.
Notes:
Always eject the tape when not in use.
The cassette tape can be ejected even if the POWER is "OFF".
o
÷
To prevent accidenta[ erasure
Remove the erase prevention tab with a screwdriver.
Screwdriver
Erase prevention tab
To record again
Cover the hole with a piece of adhesive tape.
_- Adhesive tape
'/- Video cassette tape
lape _peec_
T-160 T-120 T-90 T-60 T-30
SP (Standard Play) 2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
\SLP (Super Long Play) 8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
J
33
5L00201C [E]p33-37 33 _ 20/4/04, 16:06