a TVprogram
Recording and viewing the same TV program.
"<'"<+"+- ..............................¸¸"¸¸i¸i
.....................TV/VCR
4
÷
....IRecor£!I!a: TVi!ro!rami:__i_i_iii_i_ii_i_
Load a cassette tape with the erase
prevention tab intact.
The unit will automalcally turn on
Press SPiSLP to select the desired tape speed
SP or SLR
The tape counter and SP or SLP wi!
appear on the screen for about 4
seconds.
.,s. [ ]
RETURN
Press STOP to stop recording.
"[]" will appear on screen for about
4 seconds.
To stop recording temporarly
Press PAUSE/STILL to avoid recording unwanted
3 e{ect "'IV" or "CABLE" tothe appropriate
position [_.
Press Direct channel se[ecton (0=9) or CHANNEL
A/V to select the channel to be recorded,
o o Q @
0
material
"II "wi/appear on the screen and
the REC/OTR indicator wi/b/nk on
and off. Press PAUSE/STILL or
both REC at the same time to
continue the recording.
•PAUS_ST,LL _ii!
_) / IX
Note:
The pause function wll be released after 5 minutes to prevent
Press both REC at the same time.
' @" will appear on the screen for
about 4 seconds and the REC/OTR
indicator on the front panel will light.
o o -.?,-
Notes:
• If power is switched off during recording, the TV and the
DVD sections go off and the VCR continues to record.
Press the STOP button to halt the recording and turn off the
VCR.
• The unit channel cannot be changed during recording.
• If you record the TV program after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
damage to the tape or the unit. The unit will change to the STOP
mode.
[] Auto Rewind feature
This VCR wil automatica/y rewind the tape when the tape
has ended (except during OTR and timer recording). It wi/
also eject the tape.
Note:
tf the erase prevention tab is removed, the tape will eject when
both the REC buttons are pressed for recording.
÷
20/4/04.16:07
÷
To Next Page
Loading...
