Toshiba NB300 - Figure 4.3 Detach Two Antennas and Remove Two Screws; Figure 4.4 Removing the WLAN Card

Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
3. Remove two M2x4 screws that secure the WLAN card.
M2x4*2
White antenna cable
WLAN Card
Black antenna
cable
Figure 4.3 Detach two antennas and remove two screws
4. Pull the WLAN card out at an angle.
Figure 4.4 Removing the WLAN card
NB300 Maintenance Manual 4-11