4 Replacement Procedures Error! Style not defined. Error! Style not defined.
Installing the Fan and the Thermal Module
Install the Fan and the Thermal Module according to the following procedures.
1. Reapply Shinetsu 7762 grease on the thermal module as shown in Figure 4.46.
Therm
al grease
Figure 4.46 Reapply Shinetsu 7726 grease on the thermal module
2. Seat the thermal module in the correct position and secure it with three M2x2.5 screws in
the sequence indicated in Figure 4.47.
M2x2.5*3
Figure 4.47 Securing the thermal module
3. Seat the fan in the correct position on the motherboard and secure it with one M2x4
screws.
NB300 Maintenance Manual 4-46
To Next Page
Loading...
