Toshiba NB300 - Main Battery Charge Test

3. Tests and Diagnostics
3.6 Main Battery Charge Test
NOTE: The AC adaptor should be connected to successfully run this test
. 30W with 19V DC for ALL SKU
This test shows and measures the main battery:
 Battery type (Lion)
 Manufacturer (Sanyo/Panasonic/Sony)
 Remain charge capacity (0 ~ 100%)
 Charge function (PASS/FAIL)
- “Battery Is Full” showed when “remain charge capacities” is 100%
The screen should display as below, if the charge function is OK, will show:.
If the charge function is NG, the screen will display as:
NB300/305 Series Maintenance Manual
13