Tests and Diagnostics
PORTEGE M780 Maintenance Manual (960-809) [CONFIDENTIAL] 3-117
3.34.6.2 Explanation of HDD Physical Each Item
▼ Percent of HDD area to be tested…A value is set up with a spin button.
Setting ranges are 5-100 in five units. Default value is 10. Value cannot be
inputted directly.
▼ Default…setup is changed into a default value.
About a message display
When the Apply button is clicked and it is judged that test time exceeds 30
minutes, the following warning messages are displayed.
O.K. : Setup is validated.
Cancellation : Setup is canceled.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
