4.16 Battery lock assembly 4 Replacement Procedures
4.16 Battery lock assembly
Removing the Battery lock assembly
The following describes the procedure for removing the battery lock assembly. (See Figure
4-27.)
1. Remove the battery lock assembly from the slot while pushing it in the direction in
the figure below.
Battery lock assembly
Figure 4-27 Removing the battery lock assembly
Installing the Battery lock assembly
The following describes the procedure for installing the battery lock assembly (See Figure 4-
27).
1. Set the battery lock assembly into the slot.
PORTÉGÉ M780 Maintenance Manual (960-809) [CONFIDENTIAL] 4-47
Downloaded from LpManual.com Manuals
To Next Page
Loading...
