4 Replacement Procedures 4.19 Front panel
4.19 Front panel
Removing the Front panel
The following describes the procedure for removing the front panel. (See Figure 4-30.)
1. Remove the front panel from the base assembly while lifting the system
board up slightly.
Front panel
Figure 4-30 Removing the front panel
Installing the Front panel
The following describes the procedure for installing the front panel. (See Figure 4-30.)
1. Set the front panel to the system board in place while lifting the system
board up slightly.
NOTE: After setting the front panel, make sure that the wireless communication switch
moves properly.
4-52 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
To Next Page
Loading...
