4 Replacement Procedures 4.20 Fan/Heat sink/CPU
4. Set the flat plate under the fan so that stress is not given to the assembly while
disassembling and assembling.
5. Remove the following screws and separate the fan and heat sink.
M2.54.0B FLAT HEAD screw 2
NOTE: Remove/Install the fan on the flat plate.
M2.5x4.0B FLAT HEAD
Heat sink
Flat plate
Fan
Figure 4-32 Removing the fan
4-54 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
To Next Page
Loading...
