4.29 Speaker 4 Replacement Procedures
Installing the speaker
The following describes the procedure for installing the speaker. (See Figure 4-47.)
1. Place the speakers to the slots on both sides.
2. Install the speaker covers to the slots on both sides while hooking the latches.
3. Arrange the speaker cables carefully as shown in the Figure 4-47 in place.
4. Stick the acetate tapes in place.
CAUTION: Arrange the speaker cable as shown in the figure below.
Speaker cable
PORTÉGÉ M780 Maintenance Manual (960-809) [CONFIDENTIAL] 4-75
Downloaded from LpManual.com Manuals
To Next Page
Loading...
